Lubrication Oil Skid for Heavy Process Equipment
A machinery supplier required a compact lubrication oil assembly for a heavy-duty drive system. The reservoir, pumps, filters and oil cooler had to share a common base and remain accessible after installation alongside the main machine.
A machinery supplier required a compact lubrication oil assembly for a heavy-duty drive system. The reservoir, pumps, filters and oil cooler had to share a common base and remain accessible after installation alongside the main machine.
Levstal fabricated the skid around the supplier’s equipment arrangement. The steelwork included mounting plates, pipe supports and a drip tray beneath the connections most likely to be opened during servicing.
The customer-supplied components were installed in sequence, starting with the reservoir and pump assemblies. Filter housings were positioned with clearance for element removal, and the cooler connections remained accessible from the edge of the skid.
Mechanical assembly included the specified pipework, valves and equipment fixings. Instrument brackets and cable supports were added after the main components were in place.
Before dispatch, mounting positions and external connections were checked against the drawings. The oil circuit was protected against contamination for transport and subsequent commissioning by the machinery supplier.
Scope delivered: welded base, mounting plates, drip tray, equipment installation, mechanical assembly, instrument brackets and transport protection.

